Posts Tagged ‘Water drops’

Drip, Drip, Drip

Tuesday, March 16th, 2010

Hi All,

Wanted to do these for ages and have tried before with no luck, however think I have nailed it this time.

This was first attempt :-

However this was not the effect I was after, this was shot into a shallow (1 inch) Pyrex dish and this is the water drop bouncing back, what I wanted was the classic crown :-

Settings :-
Manual Mode
Shutter 200 sec fastest standard sync, the motion is stopped by flash.
Aperture f5.6 (to give some DOF over crown and variations in impact point.
Lens 100mm Macro, manual focus.
Camera on tripod, motor drive and cable release.
One flash camera left, another one camera right on eTTL metering. Controlled by STE-2 controller on camera. Red gel on left strobe and blue gel on right and color bias controlled via ratio function on controller.
A bit (but not much) of PP saturation and sharpen tweak.

This is how it really looked :

The bottle is a 1 litre water bottle with a PIN hole, tried a small bradawl and made to big a hole.
The height of this is controlled with a piece of string.
The target is a white chopping board with a white background from the back of a tea tray.

Overall I shot 633 images, got 20 okay results and then these are the best, about a 1% success rate !.

p.s. Please humor me and click on the subscribe link on the RHS.

Cheers,
Richard B.

><(()”>
Check out latest underwater exploits :-

http://www.images-underwater.net/

and

http://www.images-underwater.net/blog1/